Several Ways of Maintaining and Redistributing Brother Toner Cartridges

When you buy a new compatible brother toner cartridge on the website, you probably care about how to maintain and redistribute the toner from being humid and you can have a longer effect of printing quality, at the same time you can save less energy to your printer after when you carry some efficient and useful methods.

 

 Let’s talk about how to store the toner cartridge at first. First of all, you should store the toner cartridge in the original packaging until you are ready to install it. And you should keep in mind these things that do not store the toner cartridge in temperatures greater than 40 degree and an environment with extreme changes in humidity or temperature. The direct sunlight or dusty places should always avoided because your toner cartridge are probably get deterioration under this extreme situation, another example that an environment where corrosive gases are existing or with salty air will make your toner cartridge quality getting worse and greatly reduce the usage life of dell laser printer. What’s more, if you have a brother product like brother tn420 or other remanufactured cartridges, you had better never put your them into a car for a long period of time just for the sake of storing, your toner cartridge will break down quickly in a closed circumstance.

Next to redistribute toner rightly is so crucial as well. When the toner cartridge is near the end of its life, white steaks or light occurs. The Toner LED blinks yellow. Thoroughly shake the toner cartridge from side-to-side five or six times to distribute the toner evenly inside the cartridge and temporarily improve print quality. So you are ought to pay attention to before opening the front cover, close the output support first. If toner gets on your clothing, wiping it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric.

The problems of how to maintain and redistribute brother toner cartridges is an course, and if you have more questions or something you still don’t understand , you can ask the sellers for help or login Brother’ office website directly to seek for free after-sale services to solve the problems for you.

Brother DCP-9020CDW double-sided unit jam problem

If the device display shows a double-sided unit jam, a paper jam occurs in the bottom of the tray or in the fuser unit. Follow the steps below to clear the message duplex card.

Note: The following instructions come from a representative product that may differ from your Brother machine.

     1, keep the device open and wait for about 10 minutes to allow the internal fan to cool the internal temperature of the device.
     2, the carton completely pulled out from the device.
     3, to ensure that no paper jam to stay inside the device.
     4, if there is no paper jam inside the device, check the bottom of the tray.
     5, if not found in the paper box below the cardboard, open the device back cover.
     6, with both hands slowly pull out the paper in the back of the device.
     7. Close the rear cover until it locks in the closed position.
     8, the carton firmly back to the back of the device.

 

TN225/TN221 compatible Brother DCP-9020CDW printer, is brother dcp 9020CDW toner.